Once you've obtained the address, click the link below to register:

1. How Do I Setup Mac Address For Roomba 2
2. How Do I Setup Mac Address For Roomba Won
3. How Do I Setup Mac Address For Roomba Vacuum

The cover also has a sticker with the MAC address on it. Clipping the new cover on took seconds. Resulting in a little flashing LED on the unit. Ok, here’s where things went a little awry. The Thinking Cleaner needs to connect to a WiFi network. To set this up, you need to connect to the Roomba via an app. Amazon Link - Shows how to reset the Roomba 500, 600, 700, 800 series of Robots. I used a Wi-Fi analyzer to verify the problem, and it seems that Roomba — for whatever reason — sometimes won’t setup and broadcast this special network after being put into configuration mode. I tried the normal way to rebooting the Roomba (holding in the Clean button for 10 seconds) but after a restart, the problem still persisted. Set up MAC address filtering on your router. This is a bit tech-intensive, but it boils down to this: every device you connect to the net has a unique Media Access Control (MAC) address. You can give your router a list of MAC addresses, and tell it not to let anyone in unless they’re on the list.

Register your Device Here

Insignia

To locate your Insignia Smart TV wired MAC address you will have to navigate to the Network settings.

To navigate to the Network Settings follow these instructions

1. Press ENTER. The settings menu opens. (or press Menu)
2. Press ▲ or ▼ to highlight Network, Then press ENTER.
3. Press ▲ or ▼ to highlight WIRED, then press ENTER. (Note that the wired MAC address and the wireless MAC address are different)
4. The MAC address needed to register your Insignia Smart TV will be listed as either Ethernet Address or Wired MAC Address.

Samsung

To locate your Samsung Smart TV wired MAC address you will have to navigate to the Network settings.

To navigate to the Network Settings follow these instructions

How Do I Setup Mac Address For Roomba 2

1. Press Menu.
2. Press ▲ or ▼ to highlight Network, Then press ENTER.
3. Press ▲ or ▼ to highlight Network Settings, Then press ENTER.
4. Press ▲ or ▼ to highlight WIRED, then press ENTER. (Note that the wired MAC address and the wireless MAC address are different)
5. Press ▲ or ▼ to highlight Network Test, then press ENTER.
6. The MAC address needed to register your Samsung Smart TV will be listed as either Ethernet Address or Wired MAC Address at the top of the screen.

Sharp

To locate your Sharp Smart TV wired MAC address you will have to navigate to the Network settings.

To navigate to the Network Settings follow these instructions

1. Press the Menu on the remote.
2. Press ◀ or ▶ to highlight Initial Setup, then press Enter.
3. Press ▲ or ▼ to select Internet Setup, then press Enter.
4. Press ▲ or ▼ to select Network Setup, then press Enter.
5. Press ▲ or ▼ to select Connection Type, then press Enter.
6. Press ◀ or ▶ to highlight WIRED, then press Enter.
7. Press ▲ or ▼ to select IP Setup, then press Enter.
8. The MAC Address should be on the bottom of the page.

Sony

To locate your Sony Smart TV wired MAC address you will have to navigate to the Network settings.

To navigate to the Network Settings follow these instructions

Older TVs

1. Press the Home button.
2. Use the arrow keys to scroll to Settings, then press Enter.
3. Use the arrow keys to scroll to Network Setup, then press Enter.
4. From the menu, select Wired Setup, then press Enter.
5. Click on Network Setup – Status and the MAC Address should be on the screen.

How Do I Setup Mac Address For Roomba Won

1. Press the Home button.
2. Use the arrow keys to scroll to Settings, then press Enter.
3. Use the arrow keys to scroll to Preferences, then press Enter.
4. Use the arrow keys to scroll to Setup, then press Enter.
5. Use the arrow keys to scroll to Network Setup, then press Enter.
6. Click on Network Setup – Status and the MAC Address should be on the screen. Please ensure it says Wired and not Wireless.

Vizio

To locate your Vizio Smart TV wired MAC address you will have to navigate to the Network settings.

To navigate to the Network Settings follow these instructions

1. Press Menu on the remote.
2. Press ▲ or ▼ to highlight the Network, then press OK.
3. The Network Connection menu displays.
4. Press ▲ or ▼ to highlight Manual Setup, Then press OK. The IP Settings menu is displayed.
5. At the bottom of the menu the RJ45 MACaddresses is displayed. (Do not register the wireless MAC address)

How Do I Setup Mac Address For Roomba Vacuum

Once you've obtained the address, click the link below to register:

Register your Device Here